• google scholor
  • Views: 3126

  • PDF Downloads: 56

A study on seasonal variation in the physico-chemical assessment of MPN and Fluoride analysis of drinking water of Gandhinagar area of Bhopal

H.C Kataria1*and S. Ambhore2

DOI:http://dx.doi.org/10.12944/CWE.7.2.17

Determination of fluoride concentration of sampling stations from different sites in and around villages near Gandhinagar of Bhopal was carried out by using selective fluoride ion- electode. Determination of coliform bacteria/MPN of drinking water samples collected from various places by using H2S paper strip method and checked form black coloration in paper strip.

Determination; Fluoride Ion Concentration; Drinking Water; Fluorosis; Coliforms; MPN (Myeloproliferative Neoplasm)

Copy the following to cite this article:

Kataria H.C, Ambhore S. A Study on Seasonal Variation in the Physico-chemical Assessment of MPN and Fluoride Analysis of Drinking Water of Gandhinagar Area of Bhopal. Curr World Environ 2012;7(2):301-303 DOI:http://dx.doi.org/10.12944/CWE.7.2.17

Copy the following to cite this URL:

Kataria H.C, Ambhore S. A Study on Seasonal Variation in the Physico-chemical Assessment of MPN and Fluoride Analysis of Drinking Water of Gandhinagar Area of Bhopal. Curr World Environ 2012;7(2):301-303. Available from://www.a-i-l-s-a.com/?p=2931<


Download article (pdf)
Citation Manager
Publish History


Article Publishing History

Received: 2012-07-12
Accepted: 2012-09-17

Introduction

Bhopal the capital of Madhya Pradesh territory the largest state of India. Bhopal is situated on 23°16'N Latitude and 77°25' Longitude and is located on Hard pink sand stone of Vindhya region Fluoride concentration in India, creates health problems and fluorosis. The disease previously called as "Mottled teeth" reported in Madras City (1933). Most of the population of 18 states out of 35 states in India are well affected with dental, skeletal and non-skeletal fluorosis, which southern India is badly affected by "Fluorosis". Fluoride in drinking water is 1.0-1.5 mg/l recommended by WHO (2004).

Fluoride concentration has analyzed by using ion selective electrode and ORION 407A meter followed by standards as prescribed by APHA (1992) . The water samples was preserved by adding total ionic strength adjustment Buffer (TISAB) in 1:1 radi and analysis for fluoride levels is calculate by standard curve platted on a semilog graph conc.(Log axis) vs mV. Teofia and Teofia index (TTI 1991) has commonly used to score dental fluorosis in several endemic areas of this country

The present investigation describe the qualitative and quantitative assessment of different water samples collected different sampling stations of study are collected from various sampling places in 2011-2012. by using H2S paper strip method and checked for black coloration in paper strip. A total of 5 types of bacterial colonies were identified by biochemical, cultural and microscopic examination technique.Escherichia coli,enterobacterwere dominant followed byKlebsiella pneumonae,Salmonella typhi, andProteus vulgeris.concentration of bacterial colonies was maximum in October followed by November, December and minimum in May.

The goal of household water treatment programs, like the CDC safe water system, is to reduce diarrheal disease in users by improving the microbiological quality of stored household water. Thus, testing for microbiological contaminants is useful to determine it:
  • Household drinking water is contaminated before program initiation; and
  • An intervention improves the microbiological quality of stored household water.

Microbiological indicators are bacteria shown to be associated with disease-causing organisms, but do not cause disease themselves. The three common micorbiological indicators are : (1) total coliform bacteria; (2) fecal (thermotolerant) coliform bacteria; and (3) Escherichia coli. A fourth indicator, production of hydrogen sulfide, has recently been used as well.

Total Coliform Bacteria

Disease-causing organisms can be present in water in small numbers and pose a human health risk. Because of this, indicators of disease-causing organisms present in higher concentrations were initially developed to assess drinking water safety. Because there are numerous coliform bacteria in the intestinal tracts of humans, and each person discharges between 100-400 billion per day, this group was initially chosen as the indicator organism for drinking water safety.

Fecal (Thermotolerant) Coliform Bacteria

To provide a more accurate indicator of human health risk, the fecal coliform group was developed. This group is also defined by the laboratory method, and includes those Gram-negative rod bacteria that, at 44 ± 0.2 degrees Celsius, either: 1) ferment lactose with gas production (for MPN and P/A testing), or 2) produce a distinctive colony on a suitable mediu (for MF testing). This subgroup includes the genus Escherichia, and some species of Klebsiella, Enterobacter, and Citrobacter. The terms fecal coliform bacteria and thermotolerant coliform bacteria are used interchangeably.
Table 1: Physico-chemical assessment of drinking water of Gandhi Nagar Area of Bhopal City 2011-12 Mean Seasonal Value (Pre and Post monsoon ) Table 1: Physico-chemical assessment of drinking
水的甘地Nagar博帕尔城2011 - 12
Mean Seasonal Value (Pre and Post monsoon )

Click here to View table

E. coli. Escherichia coli (E. coli)

is a bacteria that colonizes the gastrointestinal tract of humans and other mammals shortly after birth and is considered part of our normal intestinal flora. Some types of E. coli, such as E. coli O157:H7 possess virulence factors and can cause diarrheal disease in humans, but most types of E. coli are harmless. A single gram of fresh feces may contain as many as 1,000,000,000 E. coli. The mammalian gut is the normal habitat for E. coli, and, unlike other coliform bacteria, they are not normally found in uncontaminated waters. This makes E. coli an ideal indicator for human health risk. WHO states, “The presence of E. coli in water always indicates potentially dangerous contamination requiring immediate attention” (4). Due to its high prevalence and disease-causing properties, E. coli is a solid microbiological indicator. However, in some less contaminated environments, there is not enough E. coli present to calculate treatment process efficiency. When sampling for both human health risk and treatment efficiency a combined total coliform/fecal coliform bacteria test and E. coli test may need to be completed.

The World Health Organisation (WHO) and united states environmental protection Agency (USEPA) both use microbiological indicators as the guideline value or standard for safe drinking water. The WHO guideline value is that E. coli and thermotolerant (Fecal) Coliform bacteria "Must not be detectable in any 100 ml sample" of water intended for drinking (1) The guidelines also note that "immediate investigative action must be taken if E. coli are detected", and that "medium-term targets for the progressive improvement of water supplies should be set" in developing countries having difficulties meeting the standards.

Hydrogen Sulfide production

A relatively new microbiologic indicator test is measuring hydrogen sulfide production. Some bacteria excrete hydrogen sulfide in their metabolic processes. Because hydrogen sulfide is easy and inexpensive to measure, this has been suggested as a new indicator. However, hydrogen sulfide can be produced via other mechanisms than bacterial metabolism, and so hydrogen sulfide production is, in effect, measuring an indicator (Hydrogen sulfide presence of bacterial) of an indicator (bacteria of human health risk).

The finding are similar with Kataria (1996) (2000) most of value found within the permissible limit as recommended by WHO 1978. The value of faceal/coliform recommended 10/100 ml index by WHO. Some values are found beyond the limits. Hence water samples analysed in the present study has found a suitable for drinking after proper required treatment.

References
  1. Kataria, H.C., Gupta S.S. and Jain, O.P. Poll Res. 14(4):455-562 (1996)
  2. Kataria, H.C. Preliminary study of drinking water of Pipariya township, Poll, Res, 19(4) : 645-649 (2000)
  3. Rangwala, K.S. and Rangwala P.S., water supply and sanitary, engineering character pub. House Anand (vely), India, 12th ed. 4344 (1927).
  4. BIS : Specification for drinking water IS : 10500: Bureau of Indian Standards, New Delhi (1991).
  5. Kataria, H.C., Analytical study of trace elements in groundwater of Bhopal city. Ind. J. Environment Prot. IJEP, 24(12):894-896 (2004)
  6. Kataria, H.C., et al., Physiochemical analysis of water of Kubza river of Hoshangabad, Orient J. Chem., 11(2) : 157-159 (1995).
  7. WHO, Guidelines for drinking water quality Vol. 1 (1984).
  8. APHA : Standard methods for the examination of water and waste water, Americal Public Health association (Greenberg, AE, Clexeri, L.S. and Eaton A.D., 18th ed. Washington DC.) (1992)
  9. Kataria, H.C., et al., Flurosis with special reference to fluroide contents in drinking water of Bhopal city (M.P.) Research Link, 14 3(4) : 12, 13 (2004)
  10. Teotia, SPS and Teotia, Endemic Fluoride, Bomes and teeth update, J. Environ. Toxicol 1 : 1-16 (1991).