当前世界环境

Introduction

The contribution of heavy metals and their ions to water pollution is a very serious problem, largely because the physiological effects of some of them may be dangerous even at concentrations that are extremely low. Waste water containing heavy metal ion mainly originates from metal processing industries, chemical industries and other industrial processes.^1,2,3

In recent years considerable attention has been devoted to the study of different types of low cost material^2,4,5such asGuargum chitin, tamarind kernal powder (TKP),Ferronia elefuntum, fruit shell (bark) etc. Some investigators have used carbonaceous precursors like pearl millet husk, date pits, saw dust, buffing dust of leather industry, coir pith, crude oil residue, tropical grass, olive stone, almond shell, pinebark, wool waste, coconut shell, dried stem of pandonus etc. For the removal of metal ion from water and waste water.^6,7,8

Modified barks for scavenging toxic heavy metal ions from solution has been reported by several workers.^6-13However the efficiency of the commonly available Indian barks asAcacia arabicafor the removal of toxic heavy metal ions does not seem to have been evaluated. Based on this fact the purpose of this adsorption studies with low cost material is more than justified.

Material and Methods

All chemicals used were of high purity, commercially available AnalaR grade.

化学处理粉的树皮Acacia arabicais a raw material used as adsorbent.It was collected from the locally available sources, cleaned with hot water and dried at 55⁰C for 48 hours. Dried and grinded powder were sieved to achieve an average particle size (0.2 mm), homogenized and stored in clean bag until further treatment. A mixture of one part of 40% aqueous formaldehyde solution and 20 parts by volume of 0.2N H₂SO₄was heated at 55°C then, 2.5 parts by weight of grinded bark was added in it. This mixture was stirred for two hours at 55°C and filtered through sintered glass funnel. The residue was washed with distilled cold water until the pH of the filtrate achieved to 4 to 5.

Table 1: Change in pH of water sample having bark powder (One part of substrate in contact with 100 ml of water) Click here to view table

Experimental

The stock solution of synthetic waste water containing 1000 mg. dm^-3of metal ions Cu²⁺, Pb²⁺, Zn²⁺, Cd²⁺was prepared using metal salts. Test solutions were prepared from stock solution having concentration of metal ion in ppm.

表2:pH值的影响the uptake of some heavy metal ions on A. arabica bark ​​​​​​​Click here to view table

One gram of the powder of treated bark and 100 ml of a test solutions containing heavy metal ions were gently agitated at room temperature for an hour. The mixture was filtered and analysed for trace metal by atomic absorption spectrophotometer. The quantity of heavy metal ions adsorbed on bark was determined by measuring their initial and final concentration in the solution.

Table 3: Removal of Lead and Zinc ion from solution by treated bark powder ​​​​​​​Click here to view table

Table 4: Removal of cuppric ion and cadmium ions from solution by treated bark powder ​​​​​​​Click here to view table

Results and Discussion

The pH level of doubly distilled water solution and the water containing bark powder (One gram of bark per 100 ml of distilled water) were measured after one hour and then after 48 hours. The results have been reported in the table-1. It can be seen that the pH of the equilibrium solution vary from 4.9 to 5.9.

Thus their resultant pH levels can have some effect on the binding of heavy metals. In the continuous operation the soluble acids quickly leached out from the bark and carried away the metal ion from the test solution.

The concentration of heavy metal ions (ppm) in solution at different pH-values with one gm of theA. arabicabark ( Babul) have also been measured. The pH of the solution in all the cases has been adjusted with sodium hydroxide and dilute nitric acid. The results have been given in the table 2. It shows that at pH 1, there is no uptake of metal ions by the substrate. It can be seen from the table that maximum uptake of lead ions occurs at pH 7, copper and zinc at pH 11, while cadmium ions occur at pH 9. In all cases, the uptake of the meal ions initially reaches a maximum value as the pH is increased and then it fluctuates.

The adsorption of lead and zinc ion from their nitrate solutions have also been evaluated. It is observed that modified bark adsorb lead ions quite well. The percentage of lead and zinc ions removed from the nitrate solution is 91.66% and 38.7% respectively as reported in the Table 3.

Results obtained for removal of copper ions and cadmium ions from their sulphate and chloride salts have been given in the table IV. The percentage of copper ions & cadmium ions removed were found 73.6% & 62.5% respectively.

Conclusion

The modified and treated bark sample ofAcacia arabica(Babul) is applied, which is mostcommonly available in India and is inexpensive. The present studies have appreciable affinity for finding the heavy metal ions like Cu²⁺, Pb²⁺, Zn²⁺& Cd²⁺. Randall and Coworkers^8-9have demonstrated the binding of heavy metal ions on the western bark sample is pH dependent, because Tannin in the bark act as a weak acid ion exchanger i.e. exchanging two hydrogen ions in the solution for each divalent metal ion bound to the solid.

Acknowledgements

Authors acknowledges sincere thanks to Dr. O.P. Joshi, Principal, PMB Gujarati Science College, Indore for providing the necessary facilities and for kind support.

References