• google scholor
  • Views: 4964

  • PDF Downloads: 951

Electrochemical behavior of copper electrode in sodium hydroxide solutions

I. Zaafarany1*and H. Boller2

1Institute of Inorganic Chemistry, Johannes-Kepler-Universität Linz, A-4040 Linz Austria

DOI:http://dx.doi.org/10.12944/CWE.4.2.32

The cyclic voltammograms of the copper electrode in different concentrations of NaOH solutions was studied using cyclic voltammogram’s (CV’s) technique. In addition surface examination and morphological studies were also conducted using scanning electron microscope (SEM) and energy dispersive analysis of X-rays (EDAX). The four anodic peaks where founds to correspond successively to the formation of a mono layer of Cu2O, a thick layer of CuO and CuO22-and finally the formation of a higher oxide Cu2O3before the evolution of oxygen. It is suggested that the CuO is formed from the oxidation of Cu2O和/或直接氧化的金属铜在5米NaOH solution. The ratio of anodic and cathodic charge was found to be about unity, indicating the quantitative reduction of solid oxidation product. The behavior of copper electrode in NaOH solutions was found to be quite complicated. Thus, no simple relation were found between the voltage scan rate and both the peak current and peak potential or between the peak K current and alkali concentration of alkali.


Electrochemical Behavior; Copper Electrode; Sodium Hydroxide

Copy the following to cite this article:

Zaafarany I, Boller H. Electrochemical behavior of copper electrode in sodium hydroxide solutions. Curr World Environ 2009;4(2):277-284 DOI:http://dx.doi.org/10.12944/CWE.4.2.32

Copy the following to cite this URL:

Zaafarany I, Boller H. Electrochemical behavior of copper electrode in sodium hydroxide solutions. Curr World Environ 2009;4(2):277-284. Available from://www.a-i-l-s-a.com/?p=959